SUCCAH CONSTRUCTION INSTRUCTIONS Designed by Gary Garb LIST OF MATERIALS and TOOLS SUCCAH MATERIALS LIST: 9 - 2" x 4" x 8' studs (good grade finished) 1 - 4' x 8' x 5/8" (or 3/4") plywood sheet (exterior grade, both sides sanded) 7 - 1" x 2" x 8' boards (finished lath) 32 - 1/4" x 3" machine screws 32 - 1/4" nuts or wing-nuts 64 - 1/4 washers 80 - 1 1/4" flat head wood screws (approx. count) 6 - 3" common nails 8 - 1 1/2" galvanized corner brackets 16 - 1" galvanized nails for the above corner brackets Buy a few extra bolts, nuts, washers, and nails in case of defects, damage, loss, etc. TOOLS REQUIRED: Circular saw, plywood blade, and all-purpose or carbide blade Jigsaw or scroll saw with plywood blade Drill and 1/4" and 1/8" bits Hammer Medium-size screw driver Ruler Carpenter's square Box or open end wrenches to fit 1/4" nuts (for assembly, if wing nuts not used)